The Sweetest Satin Hair Bow - DIY

Come craft with us!
Learn how to make the most adorable hair bows using our USA made Satin! 
Satin is all the rage right now and it is sure to make the most luxurious hair bow.
What You Will Need:

You Will Need the Following Pieces of Satin:

  • 7/8” x 2.5” Piece
  • 7/8” x 4” Piece
  • 7/8” x 10” Piece
  • 7/8” x 13” Piece
  • 1.5” x 13” Piece 


First, lightly heat seal all the ends of your satin pieces with a lighter. With a small dab of glue, fasten your 1.5” x 13” piece and 7/8” x 10” piece into a loop and center the seams to the backsides.


Lay your looped pieces centered on top of each other. Tri-fold the center and fasten it with embroidery floss, thread, or a zip tie.


Fold the edges of your 7/8” x 4.5” piece in towards the backside. Glue in place. Glue the strip around your alligator clip.


Fold the ends of your 7/8” x 2.5” piece in towards the backside and secure with a dab of glue. This will be your center piece. Glue one end to the backside of your bow. Cut the ends of your 1.5” x 13” piece at an angle and seal with a lighter. Then fold in half as pictured below.


Glue the clip onto the backside of your bow. Place your folded piece underneath and wrap your center ribbon around to the back and glue it to the inside of the clip.


And that's it! You have created the most glamorous hair bow for just about any occasion! 

Be sure to tag us in what you made! @ribbonandbowsohmy